MIL-50, an open-framework GaPO with a periodic pattern of small water ponds and dry rubidium atoms: a combined XRD,NMR, and computational study

A new fluorinated gallium phosphate, MIL-50, has been synthesized under mild hydrothermal conditions using 1,6-diaminohexane. The chemical formula of MIL-50 is Rb(2)Ga(9)(PO(4))(8)(HPO(4))(OH)F(6).2N(2)C(6)H(18).7H(2)O. The structure is a network of hexameric units of Ga(3)(PO(4))(3)F(2) and Ga(3)(PO(4))(2)(HPO(4))F(3) via corner sharing. It creates a three-dimensional open-framework delimiting 6- and 18-ring channels running along the c axis. The diprotonated 1,6-diaminohexane and water molecules are trapped within the 18-ring pores, whereas the rubidium cations reside in the 6-ring ones. A double quantum (31)P NMR experiment and partial charge calculations indicate that water molecules are present under the form of periodic small clusters, lowering the multiplicity of one phosphorus site, P3. Though water hops within the clusters, the motion leaves the water pattern periodic. Rubidium is so tightly embedded into the framework that water moving in the large 18-ring channels does not reach it, leaving it therefore dry. The crystal framework may be ascribed to the orthorhombic space group Cmc2(1) (n degrees 36), a = 32.1510(2), b = 17.2290(3), c = 10.2120(1) A. The periodic water pattern has a different symmetry than that of the framework. A method has been devised to superpose the two sublattices that coexist in the same unit cell in order to have full occupancy of each site and to perform Madelung summations. This original method is of general interest for most zeolitic materials exhibiting a different symmetry for the framework and the template sublattices.     

A β-glucosidase from Sclerotinia sclerotiorum

The filamentous fungus Sclerotinia sclerotiorum, grown on a xylose medium, was found to excrete one β-glucosidase (β-glu x). The enzyme was purified to apparent homogeneity by ammonium sulfate precipitation, gel filtration, anion-exchange chromatography, and high-performance liquid chromatography (HPLC) gel filtration chromatography. Its molecular mass was estimated to be 130 kDa by HPLC gel filtration and 60 kDa by sodium dodecyl sulfate polyacrylamide gel electrophoresis, suggesting that β-glu x may be a homodimer. For p-nitrophenyl β-d-glucopyranoside hydrolysis, apparent K _m and V _max values were found to be 0.09 mM and 193 U/mg, respectively, while optimum temperature and pH were 55–60°C and pH 5.0, respectively. β-Glu x was strongly inhibited by Fe²⁺ and activated about 35% by Ca²⁺. β-Glu x possesses strong transglucosylation activity in comparison with commercially available β-glucosidases. The production rate of total glucooligosaccharides (GOSs) from 30% cellobiose at 50°C and pH 5.0 for 6 h with 0.6 U/mL of enzyme preparation was 80 g/L. It reached 105 g/L under the same conditions when using cellobiose at 350 g/L (1.023 M). Finally, GOS structure was determined by mass spectrometry and ¹³C nuclear magnetic resonance spectroscopy.     

Performance of quantitative analyses by liquid chromatography–electrospray ionisation tandem mass spectrometry: from external calibration to isotopomer-based exact matching

Liquid chromatography–tandem mass spectrometry (LC-MS/MS) is a versatile coupling system which combines both selectivity and sensitivity and certainty. Hence, it is generally considered as the most reliable technique to quantify chemical compounds in complex matrices. In the present paper, we evaluate the performance of LC-MS/MS methods for the quantification of 3-nitrotyrosine in human urine in order to point out its dependence on the design of the quantification method, and emphasize the role of matrix effects in the performance. We compare external and internal calibrations, isotope dilution and isotopomer-based exact matching. The role of both sample preparation and multiple transitions monitoring is particularly addressed.     

On the occupation times of cones by Brownian motion

Summary We study some features concerning the occupation timeA _t of a d-dimensional coneC by Brownian motion. In particular, in the case whereC is convex, we investigate the asymptotic behaviour ofP(A₁u0, when the Brownian motion starts at the vertex ofC. We also give the precise integral test, which decides whether a.s., lim inf _t A _t/(tf(t))=0 or for a decreasing functionf.     

Koordinative Verankerung von Nickelkomplexen an Hectorit-Schichtsilicaten mit Hilfe langkettiger Diphenylphosphinogruppen

Coordinative Anchoring of Nickel Complexes on Hectorite-Layer Silicates through long-chain Diphenylphosphine Groups The treatment of sodium and calcium hectorites with 2-diphenylphosphinoethyltriethoxysilane leads, by condensation of free hydroxyl groups, to functionalized layer silicates with long-chain diphenylphosphine groups onto which nickel chloride can be coordinated. In these modified hectorites the fourth coordination site of the tetrahedrally coordinated nickel is occupied by a labile solvent molecule. On the other hand, the complex bis(2-diphenylphosphinoethyltriethoxysilane)nickel(II) chloride prepared beforehand also reacts with sodium hectorite under condensation; but the square-planar coordination of the four stable ligands (two chloride and two phosphor atoms) is maintained. This finds its expression in a significant activity decrease in catalytic reactions as compared to the aforementioned products.     

Electroactive ligands: the first metal complexes of tetrathiafulvenyl-acetylacetonate

The reaction of tris(alkylthio)tetrathiafulvalene thiolates with 3-chloro-2,4-pentanedione affords tetrathiafulvalene (TTF) moieties substituted by the acetylacetone function (TTFSacacH), precursors of novel redox-active ligands: the acetylacetonate ions (TTFSacac). These TTFSacacHs have been characterized by X-ray diffraction analyses, and similar trends have been observed, such as a TTF core almost planar and the acetylacetone substituent located in a plane almost perpendicular to the plane formed by the TTF core. Their chelating ability has been demonstrated by the formation of the corresponding M(TTFSacac)2(pyridine)2 complexes in the presence of M(II)(OAc)2.H2O (M = Ni2+, Zn2+). These complexes with TTFSacac moieties, Ni(TTFSacac)2(pyridine)2, 6b, and Zn(TTFSacac)2(pyridine)2, 7b, have been characterized by X-ray diffraction analyses, showing in all structures the metal(II) center chelated by two TTFacac units in the equatorial plane and the octahedral coordination geometry around the metal completed by two axial pyridine ligands. Cyclic voltammetry and UV-visible-near infrared spectroscopic measurements have evidenced a sizable interaction between the two electroactive ligands and the stabilization of a mixed-valence state in the one-electron oxidized complexes.     

Can the presence of chemically inert species modify the face selectivity in asymmetric induction by cyclodextrins?

Reduction of-cyclodextrin (-CD) aromatic ketone (acetophenone and acetonaphthones) inclusion compounds were carried out in the presence of a large number of chemically inert species as potential co-guests. In several cases, it was observed that stoichiometric molar ratios of these compounds to ketone significantly modify the chiral induction yielding the inverted alcohol enantiomer and increasing the face selectivity. The results were found to depend strongly on the respective structure and shape of both the ketone and the additive, and on the molar ratio of-CD:ketone:third compound. These observations suggest the formation of a three-component inclusion complex in which the geometry of binding of the substrate and its mobility are changed with respect to the binary system.     

Two-step synthesis of high aspect ratio gold nanorods

We describe a very simple, two-step synthetic method to prepare gold nanorods with extremely high aspect ratios (> 20) and average lengths of more than 1000 nm. The method is based on a seed-mediated growth in presence of the surfactant cetyltrimethylammonium bromide. The length and aspect ratios of the nanorods can be manipulated by varying the surfactant concentration.     

On-line strong cation exchange micro-HPLC-ESI-MS/MS for protein identification and process optimization

We have developed an on-line strong cation exchange (SCX)-ESI-MS/MS platform for the rapid identification of proteins contained in mixtures. This platform consists of a SCX precolumn followed by a nanoflow SCX column on-line with an electrospray ion trap mass spectrometer. We also used this platform to study the dynamics of peptide separation/extraction by SCX, in particular to understand the parameters affecting the performance of SCX in multidimensional chromatography. For example, we have demonstrated that the buffer typically used for tryptic digestion of protein mixtures can have a detrimental effect on the chromatographic behaviour of peptides during SCX separations, thereby affecting certain peptide quantitation approaches that rely on reproducible peptide fractionation. We have also demonstrated that band broadening results when a step (discontinuous) gradient approach is used to displace peptides from the SCX precolumn, reducing the separation power of SCX in multidimensional chromatography. In contrast, excellent chromatographic peak shapes are observed when a defined (continuous) gradient is used. Finally, using a tryptic digest of a protein extract derived from human K562 cells, we observed that larger molecular weight peptides are identified using this on-line SCX approach compared to the more conventional reverse phase (RP) LC/MS approach. Both methods used in tandem complement each other and can lead to a greater number of peptide identifications from a given sample.     

Numerical Study of Pore Sizes Distribution in Gels

We introduce a new numerical technique for the calculation of the pore size distribution in two-dimensional disordered systems. Our method is based on a triangulation technique which allows a closer measurement of pores surface without any morphological hypothesis.In this work, we focus our calculations in simulated gels. Such materials are modeled in two different conditions: by means of the Diffusion-Limited and Reaction-Limited Cluster-cluster Aggregation algorithms, DLCA and RLCA, respectively. In both situations, when the particles concentration decreases, the average pores size increases. The more compact cluster in RLCA, compared with DLCA, is consistent with the pore size distribution we have calculated. The simulated mean pore size is quantitatively in agreement with experimental data from literature.